Produse pentru magnet din (668)

Permanent magnetic chucks type PMNM are high precision plates for clamping small and thin parts for precision grinding and eroding. The low magnetic field height prevents magnetization of processing tools. The chipboard is activated via a removable hex shifter. PMNM palletising clamping plates are available in 3 versions: Structure: — Neodymium magnet system, steel body, — Transverse pole pitch 1.4+0.5 mm — Holding power 100N/cm² — Magnetic field height about 5 mm — Pole plate wearing limit 6 mm Recommendation: High-precision plate for grinding and eroding

FX-KT small trusses lift workpieces that cannot be picked up with a magnet in the center, such as rings, punching tools and flanges. Two FX magnets, adjustably mounted on a truss made of high-strength aluminum, provide a secure hold. With a few simple steps, the magnets can be removed from the truss and used individually.

FXL Magnetspannblöcke bieten wir in vielen Größen und Ausführungen an. Sie können mit einer oder auch mehreren Spannflächen und unterschiedlichen Polgrößen gefertigt werden. Die Ansteuerung erfolgt, wie auch bei den FXL Magnetspannplatten, über ein FXL-C Steuergerät; wahlweise mit nur einem Kanal oder auch mit mehreren Kanälen um die einzelnen Spannflächen eines Blockes getrennt ansteuern zu können.

FXL-R round magnetic chucks in square pole technology are especially suitable for use on the lathe and on rotary tables of machining centers. The frame construction of the FXL plate can be equipped with centering elements at the front on the clamping side as well as at the rear. All FXL magnetic chucks can be operated with FXL-C or FXL-CT control units.

FX-P is the lifting magnet series for professional lifting and moving of thinner sheets, tubes and bars. The special Magnet-Coniguration in conjunction with the prismatic pole of the FX-P ensures maximum lux density even on thin material thickness. The FX-P can be positioned well on round tube and gently pressed.

Ausgestattet mit Poltyp 50+ in langer schmaler Bauform und einer maximalen Tragfähigkeit von 400/600/1000 kg, die bei Materialstärken ab 15mm erreicht wird, empfehlen sich diese leicht zu führenden und zu bedienenden Geräte zum Heben von Leisten, Schienen, Rohren, Trägern und Stangen. Auch unter Verwendung von Polverlängerungen, welche es erleichtern, die Magnete auf langen schmalen Leisten zu positionieren.

Zum Heben von Masseteilen, Schüttgut und zum gelegentlichen Aussortieren magnetisierbarer Teile. ERM sind ausgestattet mit aufgebautem Schalter und integriertem Gleichrichter, zum Direktanschluss an 230 V Netzspannung. Die Feldtiefe beträgt ca. 80-120 mm. Nicht zulässig zum Transport massiver Werkstücke in nicht abgesicherten Bereichen.

FXE-MH Elektro-Permanent Lasthebemagnete sind speziell geeignet um Brammen und Blöcke zu transportieren. Die Elektro-Permanent Module vom Typ MH wurden konzipiert um große Lasten bei großem Luftspalt sicher zu heben. FXE Elektro-Permanent Lasthebemagnete von Flaig Magnetsysteme setzen seit über 20 Jahren Standards. Elektro-Permanent Lasthebemagnete sind die beste Wahl wenn: die zu bewegende Last für Permanentmagnete zu groß ist der Lasthebemagnet ergonomisch bedient und gesteuert werden muss die Geometrie der Last nicht zu Permanentmagneten passt der Lasthebemagnet ferngesteuert und eventuell lastregulierbar sein muss die Traglast im Verhältnis zur Materialstärke für Permanentmagnete zu groß ist

Equipped with pole type 50+ in long narrow design and a maximum load capacity of 400/600/1000 kg, which is achieved with material thicknesses from 15mm, these easy-to-guide and operate devices are recommended for lifting battens, rails, pipes, beams and bars. Also using pole extensions, which make it easier to position the magnets on long narrow bars.

FXE-MH electro-permanent lifting magnets are especially suitable for transporting slabs and blocks. The electro-permanent modules type MH are designed to safely lift large loads with a large air gap. Electro-Permanent Lifting Magnets FXE Electro-Permanent Lifting Magnets from Flaig Magnetsysteme have been setting standards for over 20 years Electro-Permanent Lifting Magnets are the best choice if: the load to be moved is too large for permanent magnets the lifting magnet must be operated and controlled ergonomically the geometry of the load does not fit permanent magnets the lifting magnet must be remote controlled and possibly load adjustable the load capacity is too large in relation to the material thickness for permanent magnets

FXE-TP Elektro-Permanent Lasthebemagnete eignen sich durch ihre spezielle Bauform bestens für Träger und Profile. Die Aufnahme von Trägern am Profilsteg ist durch die speziell geformte Poloberfläche problemlos möglich. FXE-TP Lasthebemagnete gibt es auch als Traversenlösung FXE-TTP, speziell auf Ihre Anwendung zugeschnitten.

FXE TTO lifting magnet trusses are used to remove large areas from laser or flame cutting tables. Parts from 100x100mm are removed from the table in their entire layer. Depending on the material thickness, whole sheets can also be placed with the FXE-TTO. The design of the system depends on the sheet format to be moved (uncut, LxWxH) and the dimension of the smallest blank.

Battery-powered load lifting magnets are location-independent and flexible like permanent load lifting magnets and at the same time have the advantage of remote controllability and operability at the push of a button. They are mainly used where larger loads are continuously handled, as they can be switched without physical effort. Another common application is where access to the touchdown point is difficult. All our battery-powered lifting magnets are equipped with an IR remote control and a high-quality, deep discharge-proof gel battery. FBM load lifting magnets comply with the latest standard and have been designed according to the main criteria of safety and ease of use.

For lifting of ground parts, bulk material and for occasional sorting out of magnetizable parts. ERM are equipped with mounted switch and integrated rectifier, for direct connection to 230 V mains voltage. The field depth is approx. 80-120 mm. Not permitted for transporting solid workpieces in unprotected areas.

PFC-2416-4 PA | Abmessungen 24 x 16 mm, Innendurchmesser 8 mm | Datenblatt

PFM-1806-3 PP | Abmessungen 18 x 6 mm, Innendurchmesser 7,2 mm | Datenblatt PFC-2416-3 PP | Abmessungen 24 x 16 mm, Innendurchmesser 8 mm | Datenblatt PFC-2320-3 PP | Abmessungen 20 x 23 mm, Innendurchmesser 9,8 mm | Datenblatt

The temperature indicated refers to the maximum operating material temperature. However, that value can be reduced according to geometry. Article number:RM021ACSo88r-00 Grade:ANC5 L mm:22.2 H mm:11.3 h mm:3.3 B mm:7.9 D mm:6.35 Force* N:13 Surface:red Weight g:18 Temperature °C:180

The above mentioned filter bars are our standard designs. Here the end pieces are not sealed tight and therefore only suitable for dry applications. Not available ex stock, manufactured on demand Alternative to the standard we also offer individual solutions: » Seal-welded model for use in liquids (e.g. water, coolant) » High-quality stainless steel enclosure for use in food production » Increasing the max. operating temperature up to 350 °C » Manufacture of individual, not standardised sizes Article number:MS100NdQu00rh00 L mm:100 B mm:100 H mm:40 Temperature °C:80 Diameter of filter bars:25

These systems can only be fastened by adhering (glue or double-sided tape). Adequate adhesive is available from specialised trade. The following materials can be found at the rear: A18B-Ks: Polyamide (PA) A22B-Ks: Polyamide (PA) A31B-Ks: Galvanised steel AS031NdB-00s-03: Polyamide (PA) A43B-Ks: Polyamide (PA) Article number:A18B-Ks D mm:18 H mm:Force* N Force* N:37 Shear force* N:11 Weight g:6.5 Temperature °C:60

The temperature indicated refers to the maximum operating material temperature. However, that value can be reduced according to geometry. Article number:RM028ACSo88r-00 Grade:ANC5 B mm:H mm H mm:25.4 D mm:28.6 d mm:9.5 d1 mm:6.7 d2 mm:22.9 Force* N:26 Surface:red Weight g:31 Temperature °C:180

PFB-4242-2 VA | Abmessungen 42 x 40 mm, Innendurchmesser 11,5 mm | Datenblatt PFB-5252-2 VA | Abmessungen 52 x 52 mm, Innendurchmesser15,5 mm | Datenblatt

Document pocket made of transparent rigid film with magnetic strips on the back - Document pocket made of transparent rigid film with magnetic strips on the back. Ideal for labelling warehouse shelves, retail shelves, etc. • Document pocket made of transparent PET rigid film with two magnetic strip on the reverse side • Perfect for use on metallic surfaces, such as warehouse shelves, racking and metal containers • Suitable for scanners and indelible • Inserts can be exchanged quickly due to lip on the front of the document holder • Internal dimensions: 150 x 67 mm (W x H) • Suitable printable insert labels: Article number 100302 Colour:transparent Material:plastics Reference:119619

Magnetic label holder incl. insert label & transparent strip for metal surfaces - Magnetic label holder including insert label and transparent strip for metal surfaces. • Magnetic label holder including markable insert sheets • Practical c-profile for easy insert sheet insertion and secure hold • Additional transparent strip protects against soiling • Height: 40 mm • For attaching to metal surfaces such as steel shelves, metal cabinets and drawers • Including 2 A5 format labelling sheets with 6 insert sheets • Suitable printable insert labels: Article number 809902 Colour:charcoal Material:plastics Reference:171258

Flexible magnetic tape for metal surfaces. Can be cut to size and is suitable for writing on. • Magnetic labelling tape on 5 m roll • Width 30 mm • For attaching to metal surfaces such as steel shelves, metal cabinets and drawers • Flexible, elastic and kink-resistant • Can be cut individually to size • Writeable with commercially available permanent markers Colour:white Material:magnet Reference:170802

The bar magnets are workable on both sides. On the holding surface an individual shape is possible and the adhesive force is adjustable. Bar magnets with an area for a free machining on the adhesive surface moreover offer a better wear protection compared with other bar magnets. Alternative to the standard we also offer individual solutions: » Stainless steel housing + pole shoes » Greater holding power » Greater temperature until 280 °C Article number:SG006NdB-00rh02 D mm:6 (h6) H mm:20 +0.2/ -0.2 A¹ mm:10 Force 1* N ²:B¹ mm B¹ mm:Force 2* N ² Force 2* N ²:12 Weight g:Temperature °C Temperature °C:150

Cable holder, plastic, for magnetic systems, black Article number:KaH-15x10Ks L mm:15 B mm:10 D mm:4.5

MBX Magnetspannblöcke haben gegenüberliegende Spannseiten die beim Betätigen aktiviert werden. Sie sind dazu konzipiert, Werkstücke auf Stahloberflächen wie Maschinen- oder Montagetische zu spannen. Über den Innensechskant der Schaltwelle können auch mehrere MBX miteinander verbunden werden um längere oder größere Werkstücke zu spannen.

Complete set consisting of a magnetic wall mount & 10 SHERPA® A4 display panels - Complete set consisting of a magnetic wall mount and 10 SHERPA® A4 display panels. • Complete display panel set for wall applications • Wall mount with 10 SHERPA display panels in A4 format • Polypropylene display panels with coloured profile frame and low-reflection film suitable for scanners • Metal wall mount with magnetic back, can be fastened quickly and easily to metal surfaces such as shelves or machine frames • Practical pivot mechanism for simple replacement of the displays • 5-year warranty Colour:black Material:metal, plastics Reference:591801

Direct mounting of the bar magnet in iron reduced the holding power by up to 15% due to magnetic short circuiting. To avoid this, certain distances need to be maintained between the brass casing of the bar magnet and the iron. The distances are also to be adhered to if the bar magnet was shortened by dimension A. Please refer to the above column for recommended distances (distance mm). The holding surface is ground and therefore not galvanised. Alternative to the standard we also offer individual solutions: » Stainless steel housing » Housing completely galvanised to better corrosion protection » Greater temperature until 280 °C » Stainless steel pole shoes Article number:SG-6-SC/h6 D mm:6 (h6) H mm:20 +0.2/ -0.2 A¹ mm:10 Distance mm:1.5 Weight g:4.5 Temperature °C:200

Document pocket with a magnetic strip on the back. Ideal for labelling warehouse shelves, retail shelves, etc. • Document pocket with two magnetic strips on the back • Perfect for use on metallic surfaces, such as warehouse shelves, racking and metal containers • Coloured rear foil and transparent front foil made of heavy-duty polypropylene • Suitable for scanners and indelible • Inserts can be exchanged quickly • Internal dimensions: 100 x 38 mm (W x H) • Suitable printable insert labels: Article number 102202 Colour:yellow Material:plastics Reference:174104